![]() ![]() VAGCOM="$WINEPREFIX/drive_c/Program Files/VAG-COM/VagCom.1 VAG-COM Diagnostic Software for VW/Audi/SEAT/Skoda User s Manual Version See our Website for an Interactive Online version of this manual: Copyright (c) by Ross-Tech, LLC. #COM port (should be a symlink in $WINEPREFIX/dosdevices to /dev/ttyUSBx or /dev/serial/by-id/blablabla) #These settings may vary between VAG-COM installations and systems # - If necessary, applies fix to VAG-COM 409.1 (fake registered version) # - Specifies COM port baud rate, if set to zero (fixes an "Interface not found" bug") To automate the process, I have created a launcher: ![]() This is to be repeated after each "Options->Test" and after first "Select". Stty -F $WINEPREFIX/dosdevices/com1 speed 9600 The fix is to use stty and set baud rate to something acceptable, i.e. When launched from console, a message "err:comm:get_baud_rate unknown speed 1000" is generated by Wine Works flawlessly except one issue: if port baud rate is set to 0, the app fails to communicate with "Interface not found" error. ![]() Tested using a KKL-USB cable with Serial-to-USB FTDI_FT232R inside.įull device name as seen by OS: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A400h11D-if00-port0ĭo not forget to add a symlink $WINEPREFIX/dosdevices/comN to this device and change permissions (see ) I tried VAG-COM 311.2, VAG-COM 409.1 and VCDS-Lite 1.1 - all worked well. It seems that almost any version of VAG-COM/VCDS would work with the configuration described. ![]() genuine Ross-Tech cables and pure serial), only a noname KKL-USB This makes port unusableĭifferent adapters (incl. Serial port baud rate would reset to 0 when running a new "Test" or "Select" after a "Test". Everything except a baud rate bug (see below) ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |